English
English
Overview:
A hydrogen refueling station is a facility that provides hydrogen to fuel cell vehicles, similar to how conventional gasoline stations provide fuel to internal combustion engine vehicles. Typically, a hydrogen station consists of a hydrogen unloading column, compressor skid, sequence control panel, hydrogen storage cylinder group, hydrogen dispenser, station control system, heat exchanger, and chiller. The core equipment is the hydrogen compressor and hydrogen storage tanks.
Features:
Environmental Protection: Hydrogen, as a clean energy source, produces only water vapor when burned, without generating any pollutants. The construction of hydrogen stations helps reduce air pollution and greenhouse gas emissions, thus protecting the environment.
High Energy Efficiency: Compared with traditional fuel vehicles, hydrogen fuel cell vehicles have higher energy efficiency, which reduces energy consumption and greenhouse gas emissions.
Convenience: Hydrogen stations provide a convenient energy supply for fuel cell vehicles, similar to conventional gasoline stations, enabling rapid hydrogen refueling and extending vehicle range.
Intelligent Control: Mature SCADA systems for hydrogen stations can fully monitor and control the unloading system, compression system, storage system, dispensing system, and instrument air system, achieving seamless interactive operation.
Specification:
No. | Capacity | Standard Configuration | Pressure Grade | Filling Pressure |
1 | 200 kg/d (12h) | One dual-nozzle single-metering hydrogen unloading column, one 200 kg/d compressor, one sequence control panel, one 4 m³ cylinder group, one single-nozzle single-metering hydrogen dispenser | 90 MPa | 70 MPa |
2 | 500 kg/d (12h) | One dual-nozzle single-metering hydrogen unloading column, one 500 kg/d compressor, one sequence control panel, one 9 m³ cylinder group, one dual-nozzle single-metering hydrogen dispenser | 45 MPa | 35 MPa |
3 | 1000 kg/d (12h) | One dual-nozzle single-metering hydrogen unloading column or two single-nozzle single-metering hydrogen unloading columns, one 1000 kg/d compressor or two 500 kg/d compressors, one sequence control panel, one 15 m³ cylinder group, two dual-nozzle single-metering hydrogen dispensers | 45 MPa | 35 MPa |
